EDGEMASTER
products feature a very unique process to form corners to create
for example a pan shaped part from a solid rectangle of metal in
one process. This technique eliminates all welding and finishing
as a secondary process. The savings for manufacturers which either
produce a lot of these types of parts or those who today leave the
corners un-welded, because they can not afford to close them, can
be tremendous.
Cold
rolled steel up to 0.125” can be formed in almost any combination
of flange bending radius and actual corner radius. Corner radii
of up to 2” may actually be created.
Cold
rolled steel up to 0.125” can be formed in almost any combination
of flange bending radius and actual corner radius. Corner radii
of up to 2” may actually be created.
Stainless
steel, aluminum and other formable alloys may also be processed.
The
parts created are consistent in appearance. The material in the
vertical bend is not weakened, in the contrary.
Flange
heights up to 1.0” or in special cases up to 1.5” are
possible. Please see the flange chart for specifics based on your
material and thickness.
The
process takes less than 9 seconds for each corner regardless of
the material or the shape applied. |